|
|
很爽啊希望增加“一次休眠快速启动”
［重大更新］成功提取并移植XPE 2007的EWF系统保护功能，有兴趣的过来看看！
本软件提取中自Windows XP Embedded SP2 FP 2007 CTP
在修改注册表过程中遇到难题，得到不改大师的帮助，在此表示感谢！
hnlyzhd 2006.10.25 于河南洛阳
*******************************************************************************
软件使用说明：
［一］、系统磁盘保护
1.运行SETUP.BAT安装脚本将所有文件及注册表安装到系统盘，注册表默认对硬盘第一分区进行保护。
2.本软件仅仅在XP SP2下通过测试。
3.软件主要程序EWFMGR.EXE通过/?可得到帮助信息
4. 数据保存使用SAVE.BAT
打开保护使用TRUN ON.BAT
取消保护使用TRUN OFF.BAT
［二］、一次休眠快速启动
1.本EWF支持一次休眠多次快速启动功能，请手工复制HORM.DAT文件到C：
2.请输入ewfmgr c: 确认EWF处于打开状态
3.输入ewfmgr c: -activatehorm
4.对系统进行休眠操作。
5.重新启动后就可以实现快速启动了，这时你无论是断电，复位，强行关机等操作均无效！只能从休眠状态快速启动
6.取消快速启动顺序： ewfmgr c: -disable -------> ewfmgr -deactivatehorm ----> reboot
详细内容请看以下英文说明:
To disable EWF in a Hibernate Once/Resume Many environment
Disable EWF by using the EWF Manager command or the EWF API, for example:
ewfmgr c: -disable
Deactivate HORM by using the EWF manager command or the EWF API, for example:
ewfmgr -deactivatehorm
Restart the system. For example:
xpepm -restart
If you have not previously deactivated HORM (step 2 above), press F8 at the Resuming Windows screen during system boot and do the following:
At the prompt, select Delete restoration data and proceed to system boot menu. The system boots normally and EWF will be disabled.
After EWF is disabled, you can apply updates or install applications to your run-time image. To re-enable Hibernate Once/Resume Many, see Enabling a Hibernate Once/Resume Many Environment with EWF.
To commit and disable EWF in a Hibernate Once/Resume Many environment
From a command prompt, use EWF Manager to commit and disable EWF. For example:
ewfmgr c: -commitanddisable -live
From a command prompt, use EWF Manager to commit and disable EWF. For example:
ewfmgr c: -commitanddisable -live
The contents of the EWF overlay are committed to the protected volume and EWF is immediately disabled.
The hibernated image must be refreshed before your changes will take effect effect for subsequent system boots. For example, use the windows XP Embedded Power Management Applicaiton component:
xpepm -hibernate
Disable EWF by using the EWF Manager command or the EWF API, for example:
ewfmgr c: -disable
Deactivate HORM by using the EWF manager command or the EWF API, for example:
ewfmgr -deactivatehorm
Restart the system. For example:
xpepm -restart
If you have not previously deactivated HORM (step 2 above), press F8 at the Resuming Windows screen during system boot and do the following:
At the prompt, select Delete restoration data and proceed to system boot menu. The system boots normally and EWF will be disabled.
After EWF is disabled, you can apply updates or install applications to your run-time image. To re-enable Hibernate Once/Resume Many, see Enabling a Hibernate Once/Resume Many Environment with EWF.
To commit and disable EWF in a Hibernate Once/Resume Many environment
From a command prompt, use EWF Manager to commit and disable EWF. For example:
ewfmgr c: -commitanddisable -live
From a command prompt, use EWF Manager to commit and disable EWF. For example:
ewfmgr c: -commitanddisable -live
The contents of the EWF overlay are committed to the protected volume and EWF is immediately disabled.
The hibernated image must be refreshed before your changes will take effect effect for subsequent system boots. For example, use the windows XP Embedded Power Management Applicaiton component:
xpepm -hibernate |
|
[复制链接]
IP卡
狗仔卡
发表于 2010-4-14 00:36:06
显身卡
楼主
