|
|
本帖最后由 aoyabing 于 2023-10-17 06:47 编辑
最下面有附件下载，解压后右键以管理员身份运行Orderdrv.Cmd，选择Y即可。
::Created by victor888, QQ:2511755859
::Special thanks to CLONECD
::Special thanks to all the testers who provided with valid test results.
::Ordering and showing drive letters by drive type
@echo off
SETLOCAL ENABLEEXTENSIONS
SETLOCAL ENABLEDELAYEDEXPANSION
set ver=2020-11-02
::If "AUTO" was set to "y", all messed drive letters will be re-ordered automaticly without nitification.
::If "AUTO" was set to "n", a notification will come out to ask for confirmation wether to re-order messed driver letters.
set AUTO=n
:: 1. "U" is the FIRST Removable USB Disk drive letter to be fixed just change it as you like.
:: 2. "T" is the FIRST USB CDROM drive letter to be fixed just change it as you like.
:: 3. Above drive letters must not be conflict with any other existing drive letters, otherwise error will happen.
:: 4. You may disable the function of fixing above drive letters simply by deleting them.
set USBCDROM=T
set USBDRV=U
:: Following notes are for the first hard disk that the system found.
set upactdrv=N
::1. "N" means do not put active partiction drive letter or driver letter which contains windows (x:\windows\system32\config) ahead of all hard drive letters.
::2. "Y" means put active partiction drive letter or driver letter which contains windows (x:\windows\system32\config) ahead of all hard drive letters.
set winfirst=N
::1. "N" means active partition drive letter will be the first driver letter among all driver letters as long as upactdrv is set to Y.
::2. "Y" means driver letter which contains windows (x:\windows\system32\config) will be the first driver letter among all driver letters when upactdrv is set to Y and no active partition drive letter exists.
pushd %~dp0
if %~d0 neq %systemdrive% (
if not exist %temp%\%~nx0 (
copy %0 %temp%\ /y >nul
copy drvtype.exe %temp%\ /y >nul 2>&1
copy fsutil.exe %temp%\ /y >nul 2>&1
copy mountvol.exe %temp%\ /y >nul 2>&1
copy smartctl.exe %temp%\ /y >nul 2>&1
pushd %temp%\
call %~nx0
exit
)
)
echo Batch file for ordering messed drive letters.
echo V.!ver!, By Victor888 from WUYOU.NET
echo ------------------------------------------------------------------
echo.
echo Here is detailed information:
echo.
::get all drive letters by fsutil.exe
call :fsutil
if defined ALLDRV (
set ALLDRV=!ALLDRV:\=!
set ALLDRV=!ALLDRV: =!
set ALLDRV=!ALLDRV::=: !
)
echo All drive letters: %ALLDRV%
::get all volume mount points and their full paths and merge them
FOR /F %%a in ('mountvol ^|find "\"') do set mtvdrv=!mtvdrv! %%a
::get unique drive letters which contain ":"
set mtvdrv=%mtvdrv: =%
set mtvdrv=%mtvdrv:\\?\Volume= %
set mtvdrv=%mtvdrv:}\=}%
for %%a in (%mtvdrv%) do (
for /f "delims=} tokens=1,2" %%b in ("%%a") do (
set drv=%%c
set ttmp=%%c
set ttmp=!ttmp:~-2,1!
if !ttmp! equ : set mtdrv=!mtdrv! !drv:~0,2!
)
)
if defined mtdrv (
set mtdrv=!mtdrv: =!
set mtdrv=!mtdrv::=: !
echo Mounted drive letters: !mtdrv!
)
::get virtual drive letters which has no mount point
set virdrv=%ALLDRV%
for %%a in (%mtdrv%) do (
set virdrv=!virdrv:%%a=!
)
set virdrv=!virdrv: =!
if defined virdrv (
set virdrv=!virdrv::=: !
echo Virtual drive letters: !virdrv!
for /f "tokens=3 delims= " %%a in ('reg query HKLM\System\CurrentControlSet\Services\ISODrive\Parameters /s 2^>nul ^|find /i "drive"') do (
if %errorlevel% equ 0 (
set indvir=%%a
if defined indvir (
for %%b in (!virdrv!) do (
if /i !indvir!: equ %%b (
echo The ULTRAISO produced drive letter %%b
)
)
)
)
)
)
::get hard disk drive letters, Dataram drive letters and fixed USB drive letters by clonecd's DRVTYPE.
for /f "tokens=1-5 delims=|" %%a in ('drvtype -a ^|find ":"') do (
set diskorder=%%a
set hdtype=%%b
set gptmbr=%%c
set isssd=%%d
set strdrv=%%e
set hddrv=
smartctl -i /dev/pd%%a |find "rpm">nul||set isssd=SSD
if not defined strdrv set strdrv=%%d
for %%f in (!strdrv!) do (
set eachdrv=%%f
set eachdrv=!eachdrv:~1,2!!
if "!eachdrv:$=!"=="!eachdrv!" (
set hddrv=!hddrv! !eachdrv!
set order=!order! !diskorder!:%%f
)
)
set strdrv=!hddrv! rem added on Dec. 31, 2018
set hdtype=!hdtype:Vmware=!
if !hdtype! neq %%b (
set /a ii+=1
echo Vmware Internel !gptmbr! hard disk !ii! mount path: !hddrv!
set thddrv=!thddrv! !hddrv!
) else (
set hdtype=!hdtype:diskvirtual=!
if !hdtype! neq %%b (
set /a rr+=1
echo Virtual PC Internel !gptmbr! hard disk !rr! mount path: !hddrv!
set thddrv=!thddrv! !hddrv!
) else (
set "hdtype=!hdtype:Virtual=!"
if !hdtype! neq %%b (
set /a jj+=1
echo Virtual !gptmbr! hard disk !jj! mount path: !hddrv!
set virdrv=!virdrv! !hddrv!
) else (
set hdtype=!hdtype:RAMDISK=!
if !hdtype! neq %%b (
set /a oo+=1
echo RAMDISK !gptmbr! hard disk !oo! mount path: !hddrv!
set virdrv=!virdrv! !hddrv!
) else (
set hdtype=!hdtype:FIRADISK=!
if !hdtype! neq %%b (
set /a pp+=1
echo FIRADISK !gptmbr! hard disk !pp! mount path: !hddrv!
set firadrv=!firadrv! !hddrv!
) else (
set hdtype=!hdtype:winvblock=!
if /i !hdtype! neq %%b (
set /a bb+=1
echo WINVBLOCK !gptmbr! hard disk !bb! mount path: !hddrv!
set winvdrv=!winvdrv! !hddrv!
) else (
set hdtype=!hdtype:USB=!
if /i !hdtype! neq %%b (
set /a nn+=1
set tmpsysdrv=!hddrv:%systemdrive%=!
if /i !hddrv! neq !tmpsysdrv! (
set usbsys=!hddrv!
) else (
set uhddrv=!uhddrv! !hddrv!
)
echo Fixed USB !gptmbr! disk !nn! mount path: !hddrv!
) else (
if "!isssd!"=="SSD" (
set /a qq+=1
echo Solid State !gptmbr! Hard disk !qq! mount path: !hddrv!
set ssddrv=!ssddrv! !hddrv!
if /i !upactdrv! neq N (
if !qq!==1 (
for %%f in (!strdrv!) do (
set "eachdrv=%%f"
if /i !winfirst! neq N (
if "!eachdrv:~-1!"=="$" (
if "!eachdrv:~-2,1!"==":" set actdrv=!eachdrv:~1,2!
)
) else (
if exist %%f\Windows\System32\config (
set actdrv=%%f
)
)
)
)
)
) else (
set /a ll+=1
set thddrv=!thddrv! !hddrv!
echo Internal !gptmbr! hard disk !ll! mount path: !hddrv!
if /i !upactdrv! neq N (
if !ll!==1 (
if not defined actdrv (
for %%f in (!strdrv!) do (
if /i !winfirst! neq N (
if "!eachdrv:~-1!"=="$" (
if "!eachdrv:~-2,1!"==":" set actdrv=!eachdrv:~1,2!
)
) else (
if exist %%f\Windows\System32\config (
set actdrv=%%f
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
set newhddrv=!ssddrv! !thddrv! !firadrv! !winvdrv!
set allhddrv=!newhddrv! !uhddrv!
if defined virdrv (
if defined allhddrv (
for %%a in (!virdrv!) do (
for %%b in (!allhddrv!) do (
if %%a equ %%b (
set hdvir=!hdvir! %%a
set virdrv=!virdrv:%%a=!
)
)
)
)
)
if defined hdvir echo No mount point hard disk drive letters: !hdvir!
if defined actdrv set newhddrv=!actdrv! !newhddrv:%actdrv%=!
if defined allhddrv (
set mthddrv=!allhddrv!
if defined mtdrv (
set otherdrv=!mtdrv!
for %%a in (!mthddrv! !virdrv!) do set otherdrv=!otherdrv:%%a=!
set otherdrv=!otherdrv: =!
if defined otherdrv (
set otherdrv=!otherdrv:%systemdrive%=!
set otherdrv=!otherdrv::=: !
echo Other mounted drive letters: !otherdrv!
)
)
)
if defined otherdrv (
for %%a in (%otherdrv%) do (
set docheck=
set mnreg=
for /f "skip=2 tokens=3 delims= " %%b in ('reg query HKLM\SYSTEM\MountedDevices /v \DosDevices\%%a') do (
set "mnreg=%%b"
if defined mnreg (
set first8=!mnreg:~0,8!
if !first8! equ 5F003F00 set docheck=ok
if !first8! equ 5C003F00 set docheck=ok
if /i !docheck! equ ok (
set mnreg=!mnreg:5C=#!
set mnreg=!mnreg:5f=#!
set mnreg=!mnreg:23=#!
set mnreg=!mnreg:26=#!
set mnreg=!mnreg:00=!
for /f "tokens=2,3,7 delims=#" %%c in ("!mnreg!") do (
set tpcode=%%c
set drvcode=%%d
set prodcode=%%e
rem FDC
if /i !tpcode! equ 464443 (
set /a fd+=1
set intflp=!intflp! %%a
echo Internal Floppy Drive Letter: %%a
)
rem DAEMON TOOLS
if /i !tpcode! equ 4454534F4654425553 (
set dtdvd=!dtdvd! %%a
echo Daemon Tools CD/DVD Drive Letter: %%a
)
rem IDE
if /i !tpcode! equ 494445 (
if /i !tpcode! neq !tpcode:4364526F6D=! (
set /a id+=1
set idedvd=!idedvd! %%a
echo IDE CD/DVD ROM: %%a
)
)
rem SCSI
if /i !tpcode! equ 53435349 (
if /i !drvcode! neq !drvcode:4364526F6D=! (
if /i !prodcode! equ 5669727475616C (
echo SCSI Virtual DVD ROM: %%a
set msvirdvd = !msvirdvd! %%a
) else (
echo SCSI CD/DVD ROM: %%a
set /a id+=1
set scsidvd=!scsidvd! %%a
)
)
)
rem USBSTOR
if /i !tpcode! equ 55534253544F52 (
if /i !drvcode! equ 4364526F6D (
set /a id+=1
set /a ud+=1
set usbdvd=!usbdvd! %%a
echo USB CD/DVD ROM: %%a
)
if /i !drvcode! equ 4469736B (
set /a ur+=1
set usbrem=!usbrem! %%a
echo Removable USB "Disk" Drive letter: %%a
)
)
rem STORAGE, also removable USB
if /i !tpcode! equ 53544F52414745 (
if /i !drvcode! equ 52656D6F7661626C654D65646961 (
set /a ur+=1
set usbrem=!usbrem! %%a
echo Removable USB "Storage" Drive letter: %%a
)
)
rem FIRA_DISK
if /i !tpcode! equ 464952414449534B (
if /i !drvcode! equ 53466C6F707079 (
set /a fd+=1
set firaflp=!firaflp! %%a
echo FIRA Floppy Disk Drive letter: %%a
)
if /i !drvcode! equ 4344524F4D (
set /a frd+=1
set firadvd=!firadvd! %%a
echo FIRA CD/DVD ROM: %%a
)
)
rem WINV_BLOCK
if /i !tpcode! equ 57696E56426C6F636B (
if /i !drvcode! equ 52414D466C6F7070794469736B (
set /a fd+=1
set winvflp=!winvflp! %%a
echo Winv Block Ram Floppy Disk Drive letter: %%a
)
if /i !drvcode! equ 52414D4F70746963616C44697363 (
set /a wvd+=1
set wvbkdvd=!wvbkdvd! %%a
echo Winv Block Ram CD/DVD ROM: %%a
)
if /i !drvcode! equ 46696C654F70746963616C44697363 (
set /a wvd+=1
set wvbkdvd=!wvbkdvd! %%a
echo Winv Block File CD/DVD ROM: %%a
)
)
)
)
)
)
)
)
set flpdrv=!intflp!!firaflp!!winvflp!
if defined usbdvd (
set usbdvd=!usbdvd: =!
set usbdvd=!usbdvd::=: !
if !ud! geq 1 (
if defined USBCDROM (
set tmpud=!usbdvd:%systemdrive%=!
if defined tmpud (
set FirstUD=!usbdvd:~0,1!
if /i !USBCDROM! neq !FirstUD! (
for /f %%a in ('mountvol !FirstUD!: /l') do (
mountvol !FirstUD!: /d
mountvol !USBCDROM!: %%a
echo First USBCD ROM drive letter was set to: !USBCDROM!:
)
)
set usbdvd=!usbdvd:~2!
)
)
)
)
set dvddrv=!scsidvd!!idedvd!!msvirdvd!!dtdvd!!usbdvd!
if defined flpdrv (
set flpdrv=!flpdrv: =!
set flpdrv=!flpdrv::=: !
if !fd! gtr 1 (
echo ALL Floppy drive letters: %flpdrv%
)
)
set virdrv=!virdrv! !flpdrv!
if defined dvddrv (
set dvddrv=!dvddrv: =!
set dvddrv=!dvddrv::=: !
if !id! gtr 1 (
echo ALL DVD/CD drive letters: %dvddrv%
)
)
if defined firadvd (
set firadrv=!firadvd: =!
set firadvd=!firadvd::=: !
if !frd! gtr 1 (
echo ALL Virtual Firadisk Optical drive letters: %firadvd%
)
)
if defined wvbkdvd (
set wvbkdvd=!wvbkdvd: =!
set wvbkdvd=!wvbkdvd::=: !
if !wvd! gtr 1 (
echo ALL Virtual Winvblock Optical drive letters: %wvbkdvd%
)
)
if defined usbrem (
set usbrem=!usbrem: =!
set usbrem=!usbrem::=: !
if !ur! gtr 1 (
echo ALL Removable USB drive letters: %usbrem%
)
if !ur! geq 1 (
if defined USBDRV (
set tmprem=!usbrem:%systemdrive%=!
if defined tmprem (
set FirstU=!usbrem:~0,1!
if /i !USBDRV! neq !FirstU! (
for /f %%a in ('mountvol !FirstU!: /l') do (
mountvol !FirstU!: /d
mountvol !USBDRV!: %%a
echo First removable USB disk drive letter was set to: !USBDRV!:
)
)
set usbrem=!usbrem:~2!
)
)
)
)
echo SYSTEM DRIVE LETTER: %systemdrive%
if defined newhddrv (
set totaldrv=%usbsys% %newhddrv% %dvddrv% %uhddrv% %usbrem% %wvbkdvd% %firadvd%
) else (
set totaldrv=%usbsys% %uhddrv% %usbrem% %dvddrv% %wvbkdvd% %firadvd%
)
set totaldrv=!totaldrv:%systemdrive%=!
if defined virdrv (
for %%a in (!virdrv!) do set totaldrv=!totaldrv:%%a=!
set virdrv=!virdrv::=!
)
set totaldrv=!totaldrv: =!
set totaldrv=!totaldrv::=: !
if defined totaldrv set totaldrv=!totaldrv::=!
set fulldrv=CDEFGHIJKLMNOPQRSTUVWXYZ
for %%a in (%virdrv%) do set fulldrv=!fulldrv:%%a=!
set fulldrv=!fulldrv:%systemdrive:~0,1%=!
::ordering drive letters start
set /a kk=-1
for %%a in (%totaldrv%) do (
set /a kk=kk+1
call :olddrv %%a
)
if defined ordereddrv (
if /i !AUTO! equ n (
echo DRIVE LETTERS to be ordered: %ordereddrv:~0,-1%
set /p doorder="Are you sure to make above drive letter changes (Y/N)"
if /i !doorder! equ y (
call :mountbegin
if errorlevel 0 (
echo "Drive letter changing succeeded!"
) else (
echo "Error happened, please check no drive letter used when changing begin!"
)
) else (
echo Drive letter changing cancelled by user!
)
) else (
call :mountbegin
)
) else (
echo DRIVE LETTER ORDER IS CORRECT.
)
if %~d0 neq %systemdrive% (
if exist %temp%\drvtype.exe del %temp%\drvtype.exe
if exist %temp%\smartctl.exe del %temp%\smartctl.exe
if exist %temp%\mountvol.exe del %temp%\mountvol.exe
if exist %temp%\fsutil.exe del %temp%\fsutil.exe
if exist %temp%\%~nx0 del %temp%\%~nx0
)
pushd %~dp0
if !AUTO! equ n (
pause
goto :end
) else (
goto :end
)
goto :end
:olddrv
set nk=!fulldrv:~%kk%,1!
if /i %1 neq !nk! (
set ordereddrv=!ordereddrv! %1: to !nk!:,
)
goto :eof
:mountbegin
set ordereddrv=!ordereddrv:to=!
set ordereddrv=!ordereddrv: =!
set ordereddrv=!ordereddrv:,= !
for %%a in (!ordereddrv!) do (
set oldnew=%%a
call :vid_drv !oldnew:~0,1! !oldnew:~-2,1!
)
for %%a in (!ordereddrv!) do (
set oldnew=%%a
mountvol !oldnew:~0,2! /d
)
for %%a in (!newvid!) do (
set eachnewvid=%%a
set tmpeachnewvid=!eachnewvid:~0,1!
if !tmpeachnewvid! neq { (
pecmd show !eachnewvid:~0,-1!,!eachnewvid:~-1!
) else (
mountvol !eachnewvid:~-1!: \\?\Volume!eachnewvid:~0,-1!\
)
)
goto :eof
:dsptdrv
set dpd=
for %%a in (!order!) do (
set eachdpd=%%a
set tmpeachdpd=!eachdpd:%1=!
if !eachdpd! neq !tmpeachdpd! (
if !eachdpd:~-1! neq $ (
set dpd=!eachdpd:~0,-2!
) else (
set dpd=!eachdpd:~0,-3!
)
)
)
goto :eof
:vid_drv
set aa=%1
if defined hdvir (
set tmphdvir=!hdvir:%1=!
if !hdvir! neq !tmphdvir! (
call :dsptdrv !aa!
set newvid=!newvid! !dpd!%2
) else (
for /f %%b in ('mountvol %1: /l') do (
set tmp=%%b
set tmp=!tmp:\\?\Volume=!
set tmp=!tmp:\=!
set newvid=!newvid! !tmp!%2
)
)
) else (
for /f %%c in ('mountvol %1: /l') do (
set tmp=%%c
set tmp=!tmp:\\?\Volume=!
set tmp=!tmp:\=!
set newvid=!newvid! !tmp!%2
)
)
goto :eof
:fsutil
for /f "delims=:\ " %%a in ('fsutil.exe fsinfo drives^|more') do (
set tmpdrv=%%a
if !tmpdrv:~-2! equ %%a set ALLDRV=!ALLDRV! %%a:
)
goto :eof
:end
|
评分
-
查看全部评分
|
IP卡
狗仔卡
发表于 2023-10-16 15:59:50
收藏
支持
反对
提升卡
沉默卡
喧嚣卡
变色卡
千斤顶
显身卡
楼主
