如何把服务器陈列卡驱动加入PE里

corvus

我用PE系统引导HP DL380 G4服务器，因为不认陈列卡无法成功引导，想把陈列卡驱动加到PE里去。

tintinbt

首先, 下载 RAID的XP驱动程序, SYS文件COPY到\I386\SYSTEM32\DRIVERS中,
然后, 修改TXTSETUP.SIF, 把INF文件中内容COPY到相应SESSION中

以下是WINBUILDER中一个添加 SI3112驱动程序的的脚本, 一看就清楚了
[SI3112]
Echo,"Adding drivers for: Silicon Image (3112,3423,3512,205SA)"
ExtractFile,"%ScriptFile%","Drv","SI3112.sy_","%TargetDir%\i386\system32\Drivers"           //拷贝驱动程序

//TXTSETUP.SIF中[SCSI.LOAD] 指定驱动程序文件名
IniWriteTextLine,"%TargetDir%\I386\TXTSETUP.SIF","SCSI.Load","SI3112=SI3112.sys,4"     

//TXTSETUP.SIF中[SCSI]指定驱动硬件名
IniWriteTextLine,"%TargetDir%\I386\TXTSETUP.SIF","SCSI","SI3112="Silicon Image (3112,3423,3512,205SA)"

//TXTSETUP.SIF中[HardwareIdsDatabase]最重要, 指定硬件ID
IniWriteTextLine,"%TargetDir%\I386\TXTSETUP.SIF","HardwareIdsDatabase","PCI\VEN_1095&DEV_3112&SUBSYS_31121095="SI3112"
IniWriteTextLine,"%TargetDir%\I386\TXTSETUP.SIF","HardwareIdsDatabase","PCI\VEN_1095&DEV_3112&SUBSYS_34238086="SI3112"
IniWriteTextLine,"%TargetDir%\I386\TXTSETUP.SIF","HardwareIdsDatabase","PCI\VEN_1095&DEV_3512&SUBSYS_35121095="SI3112"
IniWriteTextLine,"%TargetDir%\I386\TXTSETUP.SIF","HardwareIdsDatabase","PCI\VEN_1095&DEV_3512&SUBSYS_34238086="SI3112"
IniWriteTextLine,"%TargetDir%\I386\TXTSETUP.SIF","HardwareIdsDatabase","PCI\VEN_1095&DEV_3112&SUBSYS_02509005="SI3112"

[ 本帖最后由 tintinbt 于 2008-5-11 10:04 AM 编辑 ]