MBRTOOL 备份和恢复 MBR63个扇区的 使用方法

2011lcq186

MBRtool /DSP /DSK:0 - will display the MBR for disk 0
MBRtool /BCK /DSK:a /SEC - will backup the MBR of all disks to the first available sector on the disks
MBRtool /BCK /DSK:1 /SEC - will backup the MBR of disk 1 to the first available sector on disk 1
MBRtool /BCK /DSK:0 /FIL:my_mbr - will backup the MBR of disk 0, to file "my_mbr"
MBRtool /RST /DSK:0 /FIL:my_mbr - will restore the MBR from file "my_mbr", to disk 0
MBRtool /BCK /DSK:0 /SEC:3 - will backup the MBR of disk 0, to sector 3 on disk 0
MBRtool /RST /DSK:0 /SEC:9 - will restore the MBR to disk 0, from sector 9 on disk 0
MBRtool /PTM:h1a2 /DSK:0 - will hide partition 1 and activate (and thus un-hide) partition 2 on disk 0
MBRtool /PTM:z1 /DSK:0 /FIL:my_mbr - will zap (delete) partition 1 in backup file "my_mbr"
MBRtool /WT0 /DSK:0 - will wipe track 0 on disk 0
MBRtool /RBC /DSK:0 - will refresh the bootcode in the MBR on disk 0
MBRtool /RBC /DSK:0 /FIL:my_mbr - will refresh the bootcode in backup-file "my_mbr"
MBRtool /RBC /DSK:0 /SEC:6 - will refresh the bootcode in the MBR-backup on sector 6 of disk 0
MBRtool /EPT /DSK:0 - will start the partition table editor to edit the partition table in the MBR on disk 0
MBRtool /EPT /DSK:0 /FIL:my_mbr - will start the partition table editor to edit the partition table in the backup file "my_mbr"
专业翻译一下
dos备份和恢复

[ 本帖最后由 2011lcq186 于 2011-12-9 12:27 编辑 ]

renchmin

这个软件是在DOS下面使用的吧。