Build过程中出现73个warning

dolaris

背景：
1. PEBuilder Version：3.1.10a
2. driversSCSIAdapter下已经安装了基本的Storage driver(如下)：
  HP Smart Array 5x and 6x Series
   HP ProLiant Dual Channel Ultra320 Host Bus Adapter (LSI Logic PCI SCSI/FC MPI Miniport Driver)
   Adaptec U320 SCSI HostRAID Controller
   Adaptec Ultra320 SCSI Cards
   Intel 82801FR/FMB/ER,6300ESB SATA RAID/AHCI Controller
   Compaq Integrated Smart Array-2 Controller (including 4200, 4250ES and 431)

问题：
builder过程中出现如下类似warning73个：
Warning: File "vmscsi.sys" not found
Warning: File "viapdsk.sys" not found
Warning: File "viamraid.sys" not found
Warning: File "SISRAID2.SYS" not found
Warning: File "sisraid1.sys" not found
...
..
.
我个人分析是基本storage driver中没有包含这些驱动？请大家给点提示。

netwinxp

XPSP2本来就没带这些磁盘驱动，可以在后面自行添加。

dolaris

好的，谢谢了。
使用最新版的DP_MassStorage_wnt5_x86-32_8021应该可以吧

adatsui

只需1個文件 cpqcissm.sys, 見 911 的 HP Proliant 插件. 按第一段的連結下驅動, 提取cpqcissm.sys文件. 


PE Builder v3 plugin
HP ProLiant Smart Array 5x and 6x Controller Driver for Windows 2000/Server 2003

Before you can use this plugin you must download a file from the internet and copy it to the plugin directory.

Download the HP/Compaq HP ProLiant Smart Array 5x and 6x Controller Driver for Windows 2000/Server 2003 v5.48.0.32.
Extract the files from the download archive and copy the driver cpqcissm.sys file to the plugin\dsk_cpqcissm directory.



; PE Builder v3 plug-in INF file
; for Compaq/HP Smart Array 5x and 6x

[Version]
Signature= "$Windows NT$"

[PEBuilder]
Name="307 DSK: HP/Compaq Smart Array 5x and 6x Driver"
Enable=1

[SourceDisksFiles]
cpqcissm.sys=4,,1

[SetValue]
"txtsetup.sif","SourceDisksFiles","cpqcissm.sys", "1,,,,,,_3,4,1"
"txtsetup.sif","SCSI.Load","cpqcissm", "cpqcissm.sys,4"
"txtsetup.sif","SCSI","cpqcissm", """Smart Array 5x and 6x Controller Support"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_B060", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_B178", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_0046", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_B060&SUBSYS_40700E11", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_B178&SUBSYS_40800E11", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_B178&SUBSYS_40820E11", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_B178&SUBSYS_40830E11", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_0046&SUBSYS_409A0E11", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_0046&SUBSYS_409B0E11", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_0046&SUBSYS_409C0E11", """cpqcissm"""
"txtsetup.sif","HardwareIdsDatabase","PCI\VEN_0E11&DEV_0046&SUBSYS_409D0E11", """cpqcissm"""

dolaris

1. 我按你的方法做了，但是还是出现相同的问题。
2. 我之前已经在\drivers\SCSIAdapter\cpqcissm下装有这个驱动，后来我参看readme文件了解这个驱动是for2000的。然后就把你给HP ProLiant Smart Array 5x and 6x Controller Driver下载解压缩后覆盖了原来的cpqcissm，重新编译依然出现同样的问题。
望大家给点看法。
另外我已下载最新版DP_MassStorage_wnt5_x86-32_8021，并把里面的vm driver解压释放到\driver\SCSIAdapter\vm. 里面包含VMSCSI.cat；VMSCSI.inf；VMSCSI.sys 三个文件。重新编译后还是出现没有找到vmscsi.sys的warning。

adatsui

留恴這個是 plugin , 不是以把它丟進 pebuilder\drivers 目錄下給 pebuilder 方式處理.

在 plubin 目錄建立新目錄如 pebuilder\plugin\Smart_Array
把 inf 段存作 如 Smart_Array.inf放進去. 把 cpqcissm.sys 也放進去.

vmware 不懂, 不使用這個東西.

[ 本帖最后由 adatsui 于 2008-3-31 08:52 PM 编辑 ]

dolaris

恩，我是以plugin的方式加载的。但是问题依旧。
另外，我在网上下了vmscsi的插件，安装后再次build，此次“Warning: File "vmscsi.sys" not found”不再出现，warning减少为72个。
难道还有73个都要在网上找相应的plugin？

xuqs

出错就出错，也不影响PE制作。我自己制作时，200多错误呢

dolaris

1. To：xuqs
    出错的确不影响PE制作，但是我用此BartPE无法启动vmware，提示缺少相应的*.sys文件;
2. To：All
    我以加载plugin的方式加入DriverPack_MassStorage后，所有驱动都已加载，问题解决。
   具体方式请见：
P.S.
    如果加载DrivePack_MassStorage后在build过程中仍然missing file，有可能是源安装盘有问题，请更换一个好的源安装盘后在重新build。我就遇到了这个问题。

FINALLY, THANKS FOR ALL YOUR HELP!

dolaris

具体方式见：
http://users.pandora.be/jtdoom/b ... BartPE_HelpFile.htm