无忧启动论坛

标题: PECMD with English 2003PE problems(Demo PE download) [打印本页]

作者: maanu 时间: 2011-8-18 20:48
标题: PECMD with English 2003PE problems(Demo PE download)
Hello My dear Chinese friends ,

i have tried and added the PECMD  in english server 2003 PE , some of the commands are succesful in it , but i need experts to  comment , if they have free time , to please help a novice.

i have upploaded a TEST PE to 115

http://u.115.com/file/clq1s3c3

, it is WIM based file . and has PECMD.INI  in system32 folder.  some of the commands , major Shortcuts ,were not created .

means LINK command not successful .a problem with USERPROFILE i think.  may be some experts here  can advice me.

您好亲爱的中国朋友，

我曾尝试和补充英语Server 2003的PE，一些命令成功PECMD，但我需要的专家评论，如果他们有空闲时间，请帮助一个新手。

我upploaded测试PE115

http://u.115.com/file/clq1s3c3

，它的WIM为基础的档案。并在system32文件夹PECMD.INI。一些命令，主要捷径，没有创建。

意味着LINK命令没有成功与USERPROFILE的问题，我认为。可能会出现一些专家在这里可以咨询我。

Regards,
Maanu from Pakistan

作者: lxl1638 时间: 2011-8-18 21:11

原帖由 maanu 于 2011-8-18 20:48 发表
Hello My dear Chinese friends ,

i have tried and added the PECMD in english server 2003 PE , some of the commands are succesful in it , but i need experts to comment , if they have free tim ...

Please look here.

http://bbs.wuyou.net/forum.php?mod=viewthread&tid=95816&page=1

1、注册表中用户文件夹的信息要完整，即位于
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
项中以下8项的键值必须齐全

QUOTE:
Favorites
Desktop
StartMenu
Startup
Programs
SendTo
Personal
QuickLaunch

2、%USERPROFILE%目录所处的位置要有一定的可写空间(不一定是X盘，存在RamDisk的话在B盘)
上述两点具备的话，PECMD三条命令(或者二条)即可登录WinPE，这三条命令是：

QUOTE:
INIT
FBWF(或RAMD)
SHEL %SystemRoot%\EXPLORER.EXE

因此使用PECMD登录WinPE时，在执行INIT命令之前需保证%USERPROFILE%所处的位置有一定的空间，
这个空间可以通过FILE命令删一些文件或开启FBWF(RAMD)来获得。

作者: maanu 时间: 2011-8-18 23:53
hello Lx1638

thank you brother for reply . i want to ask , have you download my 2003PE? and see if above can result OK ?

also , if this key is created ,

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

then is it necessery to have all these

Favorites
Desktop
StartMenu
Startup
Programs
SendTo
Personal
QuickLaunch

my pe already has above in B: drive . also , when i give command in

RUN , for %USERPROFILE%

it gives me following response , is it OK ?

, have you checked PAGE command syntax of me ? is it OK? because it did not make PAGEFILE on C drive .

also , tell me at which point should i add

INIT
FBWF(或RAMD)
SHEL %SystemRoot%\EXPLORER.EXE

??

also , i am already using WIM format PE , then why should i use FBWF command ?

here is PECMD.INI , that i am using .

您好Lx1638

谢谢哥哥答复。我想问问，你下载我的2003PE吗？看看以上的结果好不好？

此外，如果这个键被创建，

HKEY_CURRENT_USER\ SOFTWARE \ MICROSOFT\ WINDOWS \ CURRENTVERSION \资源管理器\用户shell文件夹

然后是它necessery的所有这些

我的最爱
桌面
STARTMENU
启动
程序
发送到
个人
快速启动

我的PE已经有了以上的B：驱动器。此外，当我给命令

运行，为％USERPROFILE％

它给了我以下的回应，这是确定？

你检查，我的命令语法呢？这是确定的吗？因为它没有对C驱动器的页面文件。

还告诉我，在这一点我要补充

INIT
FBWF（或RAMD）
SHEL％SYSTEMROOT％\ EXPLORER.EXE

？

另外，我已经在使用的WIM格式的PE，那么，我为什么要使用FBWF命令？

这里是PECMD.INI，我使用。

2011-08-18_204555.png (32.29 KB, 下载次数: 38)

PECMD1.zip

782 Bytes, 下载次数: 52, 下载积分: 无忧币 -2

作者: maanu 时间: 2011-8-18 23:56
also , i forgot to ask , HOW can i use the following with PECMD.

1- Mount WIM files are create shortcuts .
2- setting up WALL , like with JPG . ?
3- what version of PECMD , you recommend that i should use ??

Regards,
Maanu from Pakistan

另外，我忘了问，我该如何使用与PECMD以下。

1 - 安装WIM文件创建快捷方式。
2 - 设立像以JPG墙。？
3 - 什么样的PECMD的版本，你建议我应该使用？？

此致，
Maanu从巴基斯坦

edit 1 =

following Batch file is from Pseudo's 0PE

, i think it serves the same purpose . but the trouble is , i fail to understandthat how i will copy the following two folders to my USERPROFILE.

if not exist "%Programs%" set "Programs=%USERPROFILE%\¡¸¿aê¼¡12Ëμ￥\3ìDò"

i think PECMD will ONLY understand the Last two chinese words after USERPROFILE . thats why it keeps failing .
or may be i can manually make these two folders ?

my USERPROFILE is in my 3rd POst above.

:init
PUSHD "%~dp0"
if not defined LNG (set LNG=CHS)
if not defined LNG_NETCONFIG set LNG_NETCONFIG=íøÂçéèÖÃ
:: »ñè¡óÃ»§Ïμí3Ä¿Â¼ Start Menu/StartMenu-Programs/Desktop/Favorites
:: Get user system folder Start Menu/StartMenu-Programs/Desktop/Favorites
for /f "usebackq skip=4 tokens=1,* delims=REG_SZ " %%i in (`reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders" /v "StartMenu"`) do (set StartMenu=%%j)
set "StartMenu=%StartMenu:~1%"
if not exist "%StartMenu%" set "Programs=%StartMenu%\¡¸¿aê¼¡12Ëμ￥"
for /f "usebackq skip=4 tokens=1,* delims=REG_SZ " %%i in (`reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders" /v "Programs"`) do (set Programs=%%j)
set "Programs=%Programs:~1%"
if not exist "%Programs%" set "Programs=%USERPROFILE%\¡¸¿aê¼¡12Ëμ￥\3ìDò"
for /f "usebackq skip=4 tokens=1,* delims=REG_SZ " %%i in (`reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders" /v "Desktop"`) do (set Desktop=%%j)
set "Desktop=%Desktop:~1%"
if not exist "%Desktop%" set "Desktop=%USERPROFILE%\×àÃæ"
for /f "usebackq skip=4 tokens=1,* delims=REG_SZ " %%i in (`reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders" /v "Favorites"`) do (set Favorites=%%j)
set "Favorites=%Favorites:~1%"
if not exist "%Favorites%" set "Favorites=%USERPROFILE%\Favorites"
SETLOCAL
set PATH=%PATH%;%~dp0;%~dp0..\innerUtil;%~dp0..\Util
for %%I in (PECMD.EXE FIND.EXE STR.EXE) do if "%%~$PATH:I"=="" (
echo %LNGXPT_EXEMISS% %%I
echo %LNGXPT_RUNFAIL%
pause

[ 本帖最后由 maanu 于 2011-8-19 05:42 编辑 ]

作者: maanu 时间: 2011-9-3 03:13
I have test it.
can create Shortcuts at cmdline
pecmd load x:\i386\system32\pecmd.ini

may be you lost INIT command in PECMD.INI
you can put INIT in first line of PECMD.INI[/quote]

please see my reference PECMD.INI

TEAM ENVI W=%WinDir%|ENVI $WS=%WinDir%\SYSTEM32|ENVI WSD=%WS%\Drivers
TEAM TEXT SRNPE 2K3 0.3 by Maanu from Pakistan #0x00ffff l50 t520 r600 b550 $25|wait 3000
TEAM PATH %SystemDrive%\TEMP|INIT U,3690|EXEC @PECMD.EXE CALL $SHELL32.DLL,DllInstall,#1,U
SHOW -1:-1
LINK %programs%\system tools\diskgenius,%WS%\DG.EXE
LINK %programs%\system tools\genius,%CurDir%\DG.EXE
LINK %programs%\system tools\genius2,%Windir%\\SYSTEM32\DG.EXE
LINK %desktop%\diskgenius,%WS%\DG.EXE
LINK %desktop%\diskgenius,%CurDir%\DG.EXE

TEAM FIND Explorer.EXE,!SHEL %WinDir%\EXPLORER.EXE|WAIT 1669

TEAM WAIT 900|KILL SMSS.EXE|KILL WINLOGON.EXE|FILE %WS%\SMSS.EXE|FILE %WS%\WINLOGON.EXE

===============================

shortcuts of DG.EXE , still not created . here is interesting thing

when i run '" programs " at RUN command , it gives me following , as in picture

as you can see , INIT is still there

Regards,
Maanu from Pakistan

[ 本帖最后由 maanu 于 2011-9-3 22:41 编辑 ]

2011-09-03_193133.png (31.6 KB, 下载次数: 34)

作者: maanu 时间: 2011-9-4 06:15
i have found a very very interesting situation .

in English PE , the shortcuts are not created UNLESS the desktop is loaded already . means full explorer. after that when i prepare a file LINK.CMD

with

PECMD LOAD LINKS.INI

and run it after pe loading is complete . the shortcuts are created successfully . EVERY SHORTCUT OK .

but this does not work when i add it to PECMD.INI

TEAM TEXT Creating Shortcuts #0x00ffff l50 t520 r600 b550 $25|wait 6000
EXEC =!%CurDir%\LINK.CMD

i dont understand what is the problem . and why this does not work.

can anyone please explain ?

actually brother Chenall , advised me to load it from cmdline once PE is full loaded . and he was right .

this works only when pe is fully loaded . but i hope someone will answer that why it is not working from PECMD.INI

我发现一个非常有趣的情况。

英语PE，快捷方式不创建桌面除非是已经加载。是指完整的资源管理器。之后，当我准备一个文件LINK.CMD

与

PECMD LOAD LINKS.INI

PE加载完成后运行它。成功创建的快捷方式。 EVERY快捷方式确定。

但是，这并不工作，当我将它添加到PECMD.INI

团队文本创建快捷方式＃0x00ffff L50 T520 R600 B550$25|等待6000
EXEC=！％CURDIR％\ LINK.CMD

我不明白是什么问题。以及为什么不工作。

任何人都可以请你解释？

其实兄弟Chenall，劝我从命令行来加载它，一旦PE是满载。他是正确的。

这个工程只有当PE满载。但我希望有人会回答，为什么不从PECMD.INI工作

作者: 2011sufeimasuo 时间: 2011-9-4 19:13
我太菜了，看不懂，看上去很神奇

作者: 玄天 时间: 2011-9-4 21:39
标题: 回复 #6 maanu 的帖子
没有使用 INIT 的 I 参数吧?
即:
INIT I
差点忘了,如果在CMD中使用 PECMD 命令,变量要加双％,如 %Desktop% 写为 %%Desktop%%

[ 本帖最后由玄天于 2011-9-4 21:45 编辑 ]

作者: maanu 时间: 2011-9-4 22:36

原帖由 玄天 于 2011-9-4 21:39 发表 <a href="http://bbs.wuyou.net/redirect.php?goto=findpost&pid=2298193&ptid=198142" target="_blank"><img src="http://bbs.wuyou.net/images/common/back.gif" border="0" onload="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt='Click here to open new window\nCTRL+Mouse wheel to zoom in/out';}" onmouseover="if(this.width>screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.style.cursor='hand'; this.alt='Click here to open new window\nCTRL+Mouse wheel to zoom in/out';}" onclick="if(!this.resized) {return true;} else {window.open(this.src);}" onmousewheel="return imgzoom(this);" alt="" /></a> 
没有使用 INIT 的 I 参数吧? 
即: 
INIT I 
差点忘了,如果在CMD中使用 PECMD 命令,变量要加双％,如 %Desktop% 写为 %%Desktop%%

sorry , i did not understand what you wanted to say . can anyone please translate . you mean i should use INIT I ? instead of INIT U ?

作者: parsons 时间: 2011-9-5 21:43
标题: 回复 #1 maanu 的帖子
Please upload your TEST PE to http://www.mediafire.com/

作者: 527104427 时间: 2011-9-5 22:48

原帖由 parsons 于 2011-9-5 21:43 发表
Please upload your TEST PE to http://www.mediafire.com/

I have already upload his PE :

http://u.115.com/file/e65un07j#
Maanu_Test.iso

作者: maanu 时间: 2011-9-5 23:52
post # 10

thank you Mr Parsons , for offering your help.

post # 11

thank you brother for upload and provide the mirror . did you have any chance to study what is wrong with creating shortcuts from PECMD.INI./?

it is still a mystery , that shortcuts are OK , when i loaded it from CMD file at the Desktop. ?

may be we can add the wait command that unless the Desktop not appear , do not execute the command and wait for desktop .

like

EXEC =!%CurDir%\waitdesktop.cmd

this .CMD somehow can wait till the desktop appears ? may be with PECMD WAIT and FIND command , and once the desktop is ready , it will load

PECMD LOAD LINKS.INI

like batch file

PECMD WAIT 15000
PECMD FIND CSRSS.EXE,CALL :LINK

:LINK
PECMD LOAD LINKS.INI
PECMD WAIT 4000
exit

is it workable ?

作者: chenall 时间: 2011-9-6 00:57
Where you load the RAMDISK(B:)????

I think ramdisk(imdisk) not loaded when loading PECMD.INI.

作者: chenall 时间: 2011-9-6 01:05
I386\SYSTEM32\SOFTWARE

SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce

run the commands in PECMD first.

作者: maanu 时间: 2011-9-7 00:27
PROBLEM SOLVED

brother Chenall , was very helpful .

basically he found the problem , that the userprofiles were not yet created when PECMD.INI was running.

so i copied the registry file , Chenall pointed out . and run it from PECMD.INI first line

hiderun.exe /w cmd.exe /c md \"%USERPROFILE%\\Local Settings\\Temp\
hiderun.exe /w cmd.exe /C hiderun.exe /w %systemroot%\\packuser.exe -o%SystemDrive% -y

i saved above in CMD file and run it from first line of PECMD.INI

then i added INIT after that . and shortcut was CREATED , i am so happy now .

thank you all of you to help me greatly . thanks a lot again.

Regards,
Maanu from Pakistan

[ 本帖最后由 maanu 于 2011-9-8 05:40 编辑 ]

作者: maanu 时间: 2011-9-8 05:59
a little question more , if you guys dont mind .

what is the meaning of these lines in PECMD.INI

REGI HKLM\SYSTEM\CurrentControlSet\Control\MiniNT\!

TEAM SERV !AudioSrv|SERV AudioSrv

and why these are needed ?

in PE 1.X

作者: chenall 时间: 2011-9-8 17:04
标题: 回复 #15 maanu 的帖子
you may use PECMD RAMD to create to imdisk(b:)
eg.
only add below lines to PECMD.INI and delete HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx\000,it works.

RAMD ImDisk,P20L4H64,NTFS,B:,ImDisk
INIT

#16
TEAM SERV !AudioSrv|SERV AudioSrv

http://bbs.wuyou.net/forum.php?m ... mp;page=9#pid880109

作者: maanu 时间: 2011-9-12 05:45
# 17 Chenall

when i used PECMD RAMD to create RAMDRIVE , it  was not formatted by default .
the letter B:\ RamDriv was created , but after loading pe , it asked to Formit.

also , i want to ask , if the following is correct  form i am using in PECMD for following reg file.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"ClearPageFileAtShutdown"=dword:00000001

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced]
"ListviewShadow"=dword:00000001

[HKEY_CLASSES_ROOT\lnkfile]
"IsShortcut"=-

in PEMCD.INI , i used like below

REGI HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\ListviewShadow=#1    ( FAILED )

REGI HKCR\lnkfile\IsShortcut ( SUCCESS)

REGI HKLM\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement\ClearPageFileAtShutdown=#1       (FAILED)

am i using the wrong syntax here ?

thanks in advance

Regards,
Maanu from Pakistan

作者: maanu 时间: 2011-9-14 14:17
can anyone please tell me how i can use FORX command to make shortcut of a file from my CD drive ?

like

i am trying to do this , this MULTI.INI file is on my cd rom image , but it is not loading . although shortcut creating is fine.

LINK %Desktop%\Multi Media,%WS%\PECMD.EXE,FORX \SRNPE\MULTI.INI,ot,1,load %ot%,SHELL32.DLL#103

thanks

作者: parsons 时间: 2011-9-14 21:21
标题: 回复 #19 maanu 的帖子
Too much comma
The batter way was put FORX in .ini file and then load this .ini file
For example:
LINK %Desktop%\Multi Media,%WS%\PECMD.EXE,load %WS%\findot.ini,SHELL32.DLL#103

findot.ini:
FORX \SRNPE\MULTI.INI,ot,1,load %ot%

[ 本帖最后由 parsons 于 2011-9-14 21:23 编辑 ]

欢迎光临无忧启动论坛 (http://wuyou.net./)