无忧启动论坛

标题: 求助！金士顿DT 101 2G 8GU盘量产 [打印本页]

作者: 2010paku 时间: 2010-11-22 23:24
标题: 求助！金士顿DT 101 2G 8GU盘量产
量产前

设备名称: [H:]USB Mass Storage Device(Kingston DT 101 G2 USB Device)
PNP设备ID: VID = 0951 PID = 1642
设备序列号:
  设备版本: 1.00
  设备类型: 标准USB设备 - USB2.0高速
芯片制造商: skymedi(擎泰)
  芯片型号: SK6215/SSS6691
产品制造商: Kingston
  产品型号: DT 101 G2
  资料下载: 　http://bbs.mydigit.cn/read.php?tid=148892

6691_IM_2xnm_Normal(256 page,8KB)量产后

设备名称: [G:]USB Mass Storage Device(KINGSTON DT 101 G2 USB Device)
PNP设备ID: VID = 0C76 PID = 0005
设备序列号: 001FC641C06CF0B17BCA14DB
  设备版本: 1.00
  设备类型: 标准USB设备 - USB2.0高速
芯片制造商: SSS(鑫创)
  芯片型号: SSS6677/SSS6690
产品制造商: KINGSTON
  产品型号: DT 101 G2
  资料下载: 　http://bbs.mydigit.cn/read.php?tid=20620

----------------------------------------------------------------------------------------------
---------------- Device 1------------------
  MP Tool Version : V2.162
  INI File Name : Random
  Format Date : 2010-11-23 04:02:44
  Flash Part No : Intel D2 MLC
  CE-0, Flash ID=89-88-24-4B-A9-00-00
  VID : 0x0C76
  PID : 0x0005
  Vendor Name = KINGSTON
  Product Name = DT 101 G2
  Serial Number = 001FC641C06CF0B17BCA14DB
  Volume Label =
  F/W Version : 0xB3
  ISP Version : VA7.0100
  Flash R/W Timing : 25ns
  Channel : Byte Mode
  Homogeneous Mode : On
  HID Function : Disable
  Planes(F/W) : 2
  Pages/Block : 256 pages
  Max Current : 100 mA
  Total Blocks : 4096
  Bad Blocks : 2
  Capacity : 15615544 Sectors, 7995158528 Bytes
               7807772 KBytes, 7624.78 MBytes, 7.45 GBytes

怎么量产成USB CDROM。。求高手帮忙。。

[ 本帖最后由 2010paku 于 2010-11-23 04:33 编辑 ]

作者: jjsfm 时间: 2010-11-23 07:19
http://bbs.wuyou.net/forum.php?mod=viewthread&tid=179501

作者: 2010paku 时间: 2010-11-23 11:20
司机大哥，别怪小弟笨。看了你的gamester金士顿/東芝/鑫创U盘重新量产完全攻略(一) --- 3S 主控篇，还是有点不懂
刚才量产失败。。

---------------- Device 1------------------
  No support chip (0x0) !

28 - DOS format fail.

Starting Time: 11:17:33
Device 1:0xB3
MP Version:2.162
INI_File_Name:
Random delay 0 msec
--- Download MP ISP ---
CE-0, Flash ID=89-88-24-4B-A9-00-00-00
Searching SORTING BOARD table ...
--> Not Found
Found BACKUP Table (0000023A-0002)
Defect Table (00000800-0008)
  Original Bad Block - 0:0x005A
  Original Bad Block - 0:0x005B
Defect Table shows 4094 Good blocks, 2 Bad blocks
SafeErase (0,4096)
  Erase failed Block - 0:0:0x005A
  Erase failed Block - 0:0:0x005B
  ---> Max Bad of Plane (1,1)
  ---> Max BAD/DIE = 1
Total good blocks after SCAN: 4094 / 4096, Bad block=2
==> 2-Plane mode
Max. Bad Block Allowed = 174(2)
Adjust Max LBA = 15646720, 15646656
MaxWindows=2/1910, MaxLBA=15646656, Size=7639 MB
Max BAD of one plane is 1 (43),4096,1,1
RootSector=0x1D71,Sec/Cluster=32, SuperPage=64 ---> Alignment=47
Boot Block=0x0002,0x0004
Lun0(15243288), Lun1(403368), Public=15243288, Secure=0, CDROM=403368
Special FE Config = 56-0B-00
Defect Table Block=0x0008
--- Download ISP Code:F:\新建文件夹\MP_VER2162_ALL\ISP_CODE\6691_B3-IM_20100419_VA60600_711C.BIN---
--- ISP Code installed.
Lun0(15243288), Lun1(403368), Public=15243288, Secure=0, CDROM=403368
Public,Secure,CDROM = 15243288,0,403368
SN=001FC641C06CF0B17C3014DB
=== Preformat Done ===
Low Level Format DONE
Store INI/ERROR MSG to Block-0x0002:78.
LBATest 10M activate
CDROM image:F:\ISO\DEEPIN.iso
Total=15646656,CDROM=403368, PublicArea=15243160, SecureArea=0
Create SECURE(CDROM=1,Public=7442 MB,Secure=0 MB)
Write LBA(0x00E89898,128) Fail !
### Err: SECURE failed(17593488).
Ending Time: 11:18:02

作者: shenlang 时间: 2010-11-26 13:54
哥们，你的U盘信息和我的一样啊，你的钢口号多少啊？你有工具了？

作者: 2010paku 时间: 2010-11-26 16:17
钢口是24275，已经量产成砖块了。。

作者: styqs 时间: 2010-12-3 09:25
我的u盘也是跟你一样芯片和钢口号，失败后又救回来了，sss6691暂时没有usbcdrom的ini，如图是im_b3_2xnm芯片，用的工具是MP_Ver2162_All，

欢迎光临无忧启动论坛 (http://wuyou.net./)